Disk Exchange Network
CHEAP TRICKS WARE REGULAR DISKS
Updated 30 August 2006
Disk Exchange Network
These standard, useful disks of all types sell for $5 each. R1 (Internet Deliverable) CAD Equipment Template by Rick Ferrara. A Template of 3D Symbols of Computer and CAD Equipment. (5 symbols total) $5.00 R2 (Internet Deliverable) GWB Wall Details by Evan H. Shu. 6 standard details of metal stud and GWB wall types. $5.00 R3 (Internet Deliverable) Wiggle Linetype by Mark Madura. DataCAD linetype to simulate freehand drawing lines. Based on the "Minnesota Wiggle". Updated for DataCAD 5 & above. $5.00 R4 WITHDRAWN R5 (Internet Deliverable) Handicap Template by Evan H. Shu. Various fixtures, signage, grab bars, railings, and wheelchair lift symbols for handicap accessible design (18 symbols) $5.00 R6 (Internet Deliverable) Hatch Linetypes by Evan H. Shu. 4 linetypes used for wall hatching, /////XXXXXX, IIIIIII & II II II II II types. Updated for DataCAD 7 multi-line walls. $5.00 R7 (Internet Deliverable) International Template by Rick Ferrara. A Template of 39 International Signage and Symbols. $5.00 R8 (Internet Deliverable) Piano Template by Evan H. Shu. A Template of 8 symbols of various sizes of grand, studio and spinet pianos in plan (Steinway). $5.00 R9 (Internet Deliverable) Preview Entourage by Rick Ferrara. A Drawing File containing various architectural entourage, cars and trees. $5.00 R10 Tile Details I by Henry B. Rothberg. 16 standard tile details, using Laticrete system (DC3 Format.) $5.00 R10a Tile Details I-DXF See R77 Replacement Disk. R11 Tile Details II by Henry B. Rothberg. 11 standard tile details, using Laticrete system (DC3 Format.) $5.00 R11a Tile Details II-DXF See R77 Replacement Disk. R12 (Internet Deliverable) USA Map by Rick Ferrara. A Drawing of the US Map with Alaska & Hawaii. Includes all state borders. $5.00 R13 Tree Template by R. Wendell Phillips. Detailed Fruit Tree and Pine Tree Symbols (2 symbols total). $5.00 R14 Fractions Template by David A. Harness, Architects. A Template of architectural fractions to be used for dimensioning purposes, such as 7/16, 5/8, etc. (15 symbols total). $5.00 R15 (Internet Deliverable) Plumbing Fixtures Template by David A. Harness, Architects. A Template of plumbing fixtures organized to show plan, front and side elevations of each fixtures (12 symbols total). $5.00 R16 Clock Face by Scott McInturff. Instead of using your screen saver graphics, try turning your screen into a big working clock face! Includes settings for alarms, messages & even music. Requires use of BASIC. $5.00 R17 (Internet Deliverable) Key Labels by Evan H. Shu. Drawing File of key front labels showing keyboard interrupts and macros. $5.00 R18 WITHDRAWN - See R121-CA R19 (Internet Deliverable) Tree Elevations Template by David Munson/Lowe Associates. 8 Tree and Bush symbols for 2D Elevations or to "paste on" after hidden line removal of 3D views. $5.00
R20 (Internet Deliverable)
Tree Stamp Template
by Evan H. Shu, FAIA
28 different trees in plan for use in site plans. Now newly updated to include options with filled tone backgrounds for rendered plans. $5.00 R21 (Internet Deliverable) Angle Parking Template by Evan H. Shu. Layout aids for angle parking at 45, 50, 55, and 60 degrees. 10 symbols. $5.00 R22 (Internet Deliverable) Chairs Template by Rick Ferrara. 4 Chairs in Elevation, both front and side views. (8 symbols total) $5.00 R23 (Internet Deliverable) Entourage Men by Rick Ferrara. A Drawing file of 16 different poses of men, single or in groups. For incorporation into a template. $5.00 R24 (Internet Deliverable) Handicap Site Details by Evan H. Shu. 5 different handicap parking or ramp layout details. $5.00 R25 (Internet Deliverable) Handicap Bathrooms & Kitchen by Evan H. Shu. 10 details of various handicap bathroom and kitchen layouts. $5.00 R26 (Internet Deliverable) Wood Railing Details by Evan H. Shu. 4 Interior Wood Railings and 3 exterior Wood Deck railings. $5.00 R27 (Internet Deliverable) Metal Railing Details by Evan H. Shu. 5 Metal Railing and Stair Details. $5.00 R28 Stencil Lettering Template by Rick Ferrara. Great for Sheet Numbering. 17 key symbols of numbers and letters. $5.00 R29 Office Furniture Template by David Porter. 21 useful symbols of desks, tables and chairs for use in typical office space planning. $5.00 R30 (Internet Deliverable) Bifold and Slider Template by David Porter. Various sizes of bifold doors, pocket doors and sliders for convenient use. 21 symbols total. $5.00 R31 2 By Studs by David Porter. Standard framing lumber and metal stud shapes in real sizes for ready use in detailing and large scale plans. 15 symbols total. $5.00 R32 (Internet Deliverable) Pressed Metal Door Frame Details by Evan H. Shu. 5 standard details for typical office door details. $5.00 R33 (Internet Deliverable) Kitchen and Bath Cabinets by Evan H. Shu. 7 standard details for base and upper kitchen cabinets and typical counter details. $5.00 R34 Electrical Symbols Template by John Fornaro, Design Program Associates. Standard plan receptacle symbols, each arranged in 4 different orientations for maximum ease of use. See also B9 for bundle offer. $5.00 R35 Vertical & Lateral Files Template by John Fornaro. Standard files, also notated 2-hi thru 5-hi, suitable for most space planning needs. See also B9. $5.00 R36 Finish Schedules, Finish Symbols, & Wall Type Symbols Templates by John Fornaro. 3 Templates to help you coordinate finish schedules with Room and Wall finish keys. See also B9. $5.00 R37 Office Furniture and Partitions Templates by John Fornaro. Three templates to help you with standard office space planning. See also B9 for bundle offer. $5.00 R38 WITHDRAWN R39 HLV Medium Lowercase Font Template by Michael J. Grill. Template File of Lowercase letters as symbols for use similar in appearance to Helvetica(Linotype®) Medium Uppercase Font (P24), good for title blocks and cover sheets. See also B10 for bundle offer. $5.00 R40 HLV Medium Numbers Font Template by Michael J. Grill. Template file of Helvetica (Linotype®) numbers and punctuation marks as symbols for use w/HLV Medium Upper and Lowercase fonts (P24 & R39). See also B10 for bundle. $5.00 R41 (Internet Deliverable) Tree Elevations Template by Rick Ferrara. A variety of quality tree elevations for use in 2D drawings of elevations and sections. Now revised to include tree elevations in easy to use A: drive accessible template. $5.00 R42 (Internet Deliverable) Andersen Windows modified for DataCAD use by Bruce Kaplan. Palettes of Anderson windows in plan and elevation, provided by type in layer & drawing files. Excellent for tilt-up 3D method. $5.00 R43 (Internet Deliverable) Infill Linetype by Evan H. Shu. DataCAD linetype that will fill in a wall with solid hatching. See also P25 for combination file. Updated for DataCAD 7 multi-line walls. $5.00 R44 WITHDRAWN R45 WITHDRAWN R46 WITHDRAWN R47 (Internet Deliverable) Typical Foundation Wall Details by Evan H. Shu. 5 typical cellar wall and footing details for 1/2" & 1 1/2" detailing. $5.00 R48 (Internet Deliverable) Special Foundation Details by Evan H. Shu. 5 special details showing fireplace, pier, slab, stepped, and deck footing conditions. $5.00 R49 WITHDRAWN R50 Keyboard Interrupt Chart by F. Buckley Lofton. A Drawing File showing the whole layout of your keyboard notated with all the standard keyboard interrupts (for DCAD 4 & 5/6/7). Plot or print out at any size for very easy reference. $5.00 R51 (Internet Deliverable) Masonry Site & Planter Details by Evan H. Shu. 5 Brick planter and site wall details for 1" and 1 1/2" plotting or printing. $5.00 R52 (Internet Deliverable) Laser/Plotter Menu Swap Files by Rick Ferrara. Batch file system for swapping your DCAD.LBL file, so that in DataCAD, you know if you are plotting to your Plotter or to your Laser Printer. Can be expanded to handle any combination of input/output configurations. Also includes Key-Fake utility which will let you skip the DataCAD Intro. screen. $5.00 R53 (Internet Deliverable) 3D Roof Shapes Template by Evan H. Shu. Template file of basic gables, hips, L-shapes, wings, dormers, etc. for placement into a 3D Model for easy stretching to fit your block forms. Quicker than building roof shapes up from scratch. 17 symbols, template is displayed in 3D for easy recognition. $5.00 R54 (Internet Deliverable) Residential Garage Door Symbols by Jack Bergeron. 100 Garage Door symbols arranged in fourteen (14) templates drawn with 3D Polygons and lines for easy insertion into any view. $5.00 R55 (Internet Deliverable) Ornamental Balusters by Trina Coleron. 24 different 2-D ornamental balusters arranged into a template for easy use in doing stair or porch elevations. $5.00 R56 (Internet Deliverable) Recycle Symbols by Stephen E. Castlemun, Jr. 12 configurations of the standard recycling symbols, which are used on paper and other recycled goods. Symbols are organized into a template, as well as into a easy reference drawing file. $5.00 R57 (Internet Deliverable) Wiggle Line Plus by Brett R. Gentry. New linetypes of Wiggle Dash, Wiggle Centerline, Wiggle Dot-Dash and Wiggle Section enhance our original best-selling disk (R3). Updated for DataCAD 5 & above. $5.00 R58 (Internet Deliverable) Regen & Redraw Macros by Bruce Kaplan. Useful macros for evaluating whether you should use the display list function or not, as well as testing different video boards and computer setups. Standard Victorian House drawing is provided as measuring standard. Macros will automatically perform 10 regenerations or refreshes and measure total elapsed time. (DataCAD 4 or 5/6/7/). $5.00 R59 Wood Construction Detailing Template by James & Diane Vandenberg. Symbols of standard wood stud sections and decorative wood moulding & trim pieces. Useful in creating compound wood details. 24 symbols. $5.00 R60 Steel Section Detailing Template by James & Diane Vandenberg. Symbols of steel wide flange & tube columns, some with fireproofing sprayed on for use in plan details, partial sections, & wall sections. 20 symbols. $5.00 R61 Reflected Ceiling Fixtures Template by James & Diane Vandenberg. Symbols of lay-in light fixtures, vents, fans, detectors, etc. for use in 1/4" scale reflected ceiling plans, primarily developed for commercial use. 24 symbols total. $5.00 R62 Electric Outlet Elevation Template by James & Diane Vandenberg. Symbols of coverplates for electrical switches and outlets for use in full scale, details, or interior elevation drawings. 13 symbols total. $5.00 R63 Interior Elevations Indicator Template by James & Diane Vandenberg. Symbols used for plans indicating where interior elevations are drawn. Developed for 1/8" scale plans, they indicate the four compass directions around a detail number. All combinations are provided. 20 symbols. $5.00 R64 Column "Bubble" Template by James & Diane Vandenberg. Column "bubble" marks for use in 1/4 or 1/8" scale plans with structural grids are organized in template form with both round bubbles and hexagons with all conditions, numbers, letters and primes provided. $5.00 R65 Detail Indicator Template by James & Diane Vandenberg. Symbols of building sections, wall section marks, detail indicators, elevations and targets for use in 1/4" and 1/8" scale drawings. 27 symbols total. $5.00 R66 (Internet Deliverable) Car & Truck Stamp Template by Evan H. Shu. 5 different plan symbols of cars and trucks for use in parking lot plans. $5.00 R67 WITHDRAWN R68 WITHDRAWN R69 WITHDRAWN R70 (Internet Deliverable) Special 3D Windows by Evan H. Shu. Half-Round, Quarter-Round, Oval and Octagonal shapes drawn in 3D so they can be used with Velocity or other rendering modes. $5.00 R71 (Internet Deliverable) Paged Layers Default by Carl J. Steidel. Default drawing demonstrating Steidel's standard 10 "page" layers layout using the Multiple Drawing File approach. $5.00 R72 (Internet Deliverable) Wolverine Vinyl Section Details by Terry Wright, MGIA Architects. Drawing file now updated to show 24 plus detail sections of Wolverine 7460 vinyl siding. $5.00 R73 Naval Borders by Michael S. McGill. Standard Naval Facilities Engineering Command Southwest Division Sheet Borders and Title Blocks at 18 different plotting scales in easy template format. For use in plotting Navy "D" size sheets. Verify format for other geographic divisions. $5.00 R74 WITHDRAWN R75 Critical Path Chart by Michael S. McGill. A "ready to edit" drawing file containing a preformatted project schedule/ critical path chart. The drawing is ready to plot for may uses! $5.00 R76 Wood Hatch by Evan H. Shu. An irregular cross-hatching pattern suitable for wood section hatching or even for wood paneling. Most effective when used in conjunction with Wiggle Linetype (R3). See P60 for bundle. $5.00 R77 Tile Details-DXF by Henry B. Rothberg. Now 50 new and revised ceramic tile and stone details using Laticrete materials. Replaces R10a and R11a. $5.00 R78 (Internet Deliverable) Fieldstone Hatch by Evan H. Shu. Seamless interlocking rectangular stone paving hatch pattern. Also works well with Wiggle Linetype to produce more irregular look. Comes with POF file for DataCAD 5 and above use. $5.00 R79 (Internet Deliverable) 3D Text by Steve McGinley. DataCAD DC3/DC5 Drawing file with full alphabet of CAPITAL letters and numbers for use in DataCAD 3D models (signage) or other rendering packages. $5.00 R80 WITHDRAWN R81 CAD Log by MGIA Architects. Print out log sheet useful for tracking progress of drawing files to show who worked on the drawing at various times, backup information, directories, etc. Available in Ami-pro, MS-Word or Word Perfect Format, as well as ASCII text format. $5.00 R82 (Internet Deliverable) AddText V2.5 by John Fornaro, Design / Program Associates. Macro which will insert text above or below existing text, matching existing text parameters and line spacing. Includes trapdoor to DataCAD Text, Erase & Move menus. Now newly improved flow of operation. See M-4 for Bundle offer. $5.00 R83 (Internet Deliverable) ClipBox V1.6 by John Fornaro, Design / Program Associates. Inside/Outside erasing shield macro for placing notes in the middle of hatch patterns, cutting window holes in siding, etc. Now improved with draw box feature to include clipbox in drawing as border for note, or to create drop shadow type boxes. PermaColor feature maintains box color. See M-4 for bundle. $5.00 R84 (Internet Deliverable) MergeLyr V1.3 by John Fornaro, Design/Program Assoc. Macro for users of DataCAD 3.x versions to allow loading a layer from saved layer file in current drawing without erasing the target layer or settings. See M-5 for Bundle offer. $5.00 R85 (Internet Deliverable) ReadFile V1.3 by John Fornaro, Design / Program Associates. This DataCAD macro reads ASCII text files before importing into DCAD. Page up and down thru file to preview files before using File I/O to import. Now improved to include on-line help. See M-5 for bundle offer. $5.00 R86 (Internet Deliverable) ShowPens V1.3 by John Fornaro, Design/Program Assoc. Macro which will display all current plotter pen settings on a single menu and allow fast changing of pen assignments. Includes trapdoor to DataCAD plotter menu. Now updated to allow pen setting up to 99 for use w/DesignJet. See M-5 for Bundle offer. $5.00 R87 (Internet Deliverable) Select Refresh (SlctRfsh) V1.1 by John Fornaro, Design/Program Assoc. Macro which redraws or undraws selected portion of the drawing by your selection. Will help correct pixel blossom of Nth Engine and other display list processors. See M-4 for Bundle offer. $5.00 R88 (Internet Deliverable) StretchPoint V1.3 by John Fornaro, Design / Program Associates. This DataCAD macro which will selectively stretch lines with a common end point. Previews the results of each stretch one at a time, with a confirmation before performing stretch. Newly improved flow of control in macro. See M-4 for bundle offer. $5.00 R89 (Internet Deliverable) Unsymbol V1.0 by John Fornaro, Design/Program Assoc. Macro for DataCAD 3.x versions to allow exploding of symbols into their constituent entities after placement in drawing for subsequent editing. Similar to SYMEXP macro for DataCAD 4 thru 7. See M-5 for bundle offer. $5.00 R90 (Internet Deliverable) Fast Food Site Plan by Philip J. Hardison. Template or Drawing File with two generic site plans for front parking and rear service drive-through fast food restaurants. Two symbols / two site variations provided. $5.00 R91 CAD Lingo Dictionary by Evan H. Shu. Text file of hundreds of computer /CAD terminology w/ easy, understandable definitions. $5.00 R92 (Internet Deliverable) Gypsum Board Details Template by John F. Werne, III. 6 fully notated details of gypsum wall and ceiling conditions provided in handy template format. $5.00 R93 (Internet Deliverable) Glass Block Details Template by John F. Werne, III. 4 fully notated details of glass block wall conditions provided in handy template format. $5.00 R94 (Internet Deliverable) Roof Edge Details Template by John F. Werne, III. 4 fully notated details of flat roof edge conditions provided in handy template format. $5.00 R95 (Internet Deliverable) Expansion Joint Details Template by John F. Werne, III. 9 fully notated details of expansion joint conditions provided in handy template format. $5.00 R96 WITHDRAWN R97 WITHDRAWN R98 WITHDRAWN R99 WITHDRAWN R100 (Internet Deliverable) Corporate Logos by Stephen E. Castlemun, Jr. Corporate logos for the following are provided in template form for institutional work: Federal Express (7 sym.), Hampton Inn (4 sym), NTW, National Tire Wholesale (1 sym), Piggly-Wiggly (1 sym), Pizza Hut (2 sym), the Veteran's Administration (2), & Walgreens (6 symbols.) $5.00 R101 WITHDRAWN R102 WITHDRAWN R103 (Internet Deliverable) Cheapware Entourage Sampler Template by Shu Associates. Template of 14 symbols of trees, people, cars, furniture, etc. from a variety of Cheapware disks. Also available as S48. $5.00 R104 (Internet Deliverable) Cheapware Details Sampler Template by Shu Associates. Template of 14 symbols of architectural details of various conditions from a variety of Cheapware disks. Also available as S49. $5.00 R105 (Internet Deliverable) Cheapware 3D Sampler Template by Shu Associates. Template of 14 symbols of various 3D architectural and furnishing elements from a variety of Cheapware disks. Also available as S50. $5.00 R106 (Internet Deliverable) Tuscan Column by Philip J. Hardison. A Perfectly proportioned Classical column of the Tuscan Order is provided in template form, now both in 2D & 3D symbols and a beautiful sample drawing file. Perfect for those Neo-Classical projects! $5.00 R107 WITHDRAWN R108 (Internet Deliverable) 3D Glass & French Doors by Evan H. Shu Template of 12 Entry, Slider, Patio and French door symbols that will render, hide and allow transparency in 3D. $5.00 R109 Residential Entry Doors by Jack Bergeron. Entry doors of common styles and sizes drawn for easy insertion into any 2D or 3D view from 6 templates. 42 symbols. $5.00 R110 (Internet Deliverable) Interior Door Details Template by Michael S. McGill. An easy to use template file containing 6 commonly used interior door details (fully notated) for various conditions. $5.00 R111 (Internet Deliverable) Exterior Door Details Template by Michael S. McGill. An easy to use template file containing 8 commonly used interior door details (fully notated) for various conditions. $5.00 R112 (Internet Deliverable) Storefront Door Detail Template by Michael S. McGill. An easy to use template file which contains seven commonly used storefront details (fully notated) for various conditions. $5.00 R113 (Internet Deliverable) Door Type Symbol Template by Michael S. McGill. A variety of door type elevation symbols in an easy to use template. Symbols can be used in conjunction with a door schedule or may be inserted directly into building elevations as desired. $5.00 R114 (Internet Deliverable) Custom Keyboard Macro File by Evan H. Shu, Shu Associates. Check out our own keyboard macro file that includes our favorites and many of the most productive keyboard shortcuts cited in Cheap Tricks newsletter. $5.00 R115 (Internet Deliverable) EditPath Macro V1.4 by John Fornaro, Design / Program Associates. This handy macro will allow you to view and change the DataCAD PATH settings from one convenient menu within DataCAD. $5.00 R116 (Internet Deliverable) Directory Tree Macro by John Fornaro, Design / Program Associates. This macro will display your hard disk directory tree from within DataCAD. $5.00 R117 (Internet Deliverable) ChangeCase V1.0 by John Fornaro, Design / Program Associates. This DataCAD macro changes the case of text (UPPER vs. lower) by EGAF (Entity, Group, Area, Fence.) Choose ALL CAPS, lower case, or Initial Caps. $5.00 R118 (Internet Deliverable) Sports Template by Rick Ferrara 51 symbols of action sport figures in outline logo form organized in handy template. $5.00 R119 (Internet Deliverable) Newsletter Template by Rick Ferrara 21 symbols of common newsletter type graphic logos (scissors, pointers, check marks, etc.) organized in handy template form. $5.00 R120 (Internet Deliverable) Xmas Template by Rick Ferrara Get started early with your '95 Christmas graphics with this handy template of 40 symbols of common Christmas graphic logos organized in template format. $5.00 NOTE! ALL ARCHITECTS STAMPS ARE INTENDED ONLY FOR USE BY LICENSED ARCHITECTS IN THE STATE IN QUESTION. YOU WILL BE REQUIRED TO SUPPLY YOUR OWN VERIFIABLE REGISTRATION NUMBER R121-AK WITHDRAWN R121-AL Alabama Architect Stamp (Internet Deliverable) by Donald R. Parker, AIA DWG file of Alabama seal meeting state standards for use as architectural stamp. $5.00 R121-Arizona Architect Stamp (Internet Deliverable) by Michael S. McGill DWG file of Arizona seal meeting state standards for use as architectural stamp. $5.00 R121-CA California Architect Stamp (Internet Deliverable) by Michael S. McGill Upgraded now to provide 4 alternate formats of the California Architects' stamp for use by licensed architects. Provided in drawing format and conforms to state requirements. (Previously R18.) $5.00 R121-KY (Internet Deliverable)
Kentucky Architect/Eng. Stamps by John F. Werne . CAD Stamps meeting Kentucky's State standards for use by licensed architects and engineers. $5.00R121-MS (Internet Deliverable)
Mississippi Architects Stamp
by John Werne.
A drawing file with the architectural registration stamp for state of Mississippi suitable for editing to substitute your registration information and use in CAD drawing files. $5.00. NOTE! ALL ARCHITECTS STAMPS ARE INTENDED ONLY FOR USE BY LICENSED ARCHITECTS IN THE STATE IN QUESTION. YOU WILL BE REQUIRED TO SUPPLY YOUR OWN VERIFIABLE REGISTRATION NUMBER R121-MT Montana Architect Stamp (Internet Deliverable) by Michael S. McGill DWG file of Montana seal meeting state standards for use as architectural stamp. $5.00R121-NC (Internet Deliverable)
North Carolina Architects Stamp
by John Werne.
A drawing file with the architectural registration stamp for state of North Carolina suitable for editing to substitute your registration information and use in CAD drawing files. $5.00 R121-NV Nevada Architect Stamp (Internet Deliverable) by Michael S. McGill DWG file of Nevada seal meeting state standards for use as architectural stamp. $5.00 R121-OK (Internet Deliverable) Oklahoma Architect's Seal by Steve McGinley, Graphic Technologies. CAD Stamp meeting Oklahoma State standards for use by licensed architects. $5.00 NOTE! ALL ARCHITECTS STAMPS ARE INTENDED ONLY FOR USE BY LICENSED ARCHITECTS IN THE STATE IN QUESTION. YOU WILL BE REQUIRED TO SUPPLY YOUR OWN VERIFIABLE REGISTRATION NUMBER R121-OR (Internet Deliverable) Oregon Architect Stamp by Marshall C. Ricker. Architect's CAD Stamp for state of Oregon in DC5 file format. $5.00 R121-TN (Internet Deliverable) Tennessee Architect Stamp by Marshall C. Ricker. Architect's CAD Stamp for state of Tennessee in DC5 file format. $5.00 R121-TX (Internet Deliverable) Texas Architect Stamp by Rick Ferrara DWG file of Texas seal meeting state standards for use as architectural stamp. $5.00 R121-VA (Internet Deliverable) Virginia Architect Stamp by Ben Adderholdt, Architect. DWG file of Virginia seal meeting state standards for use as architectural stamp. $5.00
| R121-XX Architect Stamps Galore (Internet Deliverable)
all by Rick Ferrara (he's ba-a-a-ck in a big way!) Here are a host of new Architect (and Engineering/Surveying) CAD stamps for licensed professionals. As always, these stamps should only be used after apprising yourself of the individual requirements on use in the licensing state. $5.00 each (or see also M29 offer of all stamps.) NOTE! ALL ARCHITECTS STAMPS ARE INTENDED ONLY FOR USE BY LICENSED ARCHITECTS IN THE STATE IN QUESTION. YOU WILL BE REQUIRED TO SUPPLY YOUR OWN VERIFIABLE REGISTRATION NUMBER R121-AK Alaska Architect’s Stamp. Bonus: Engineering & Land
Surveying Stamps $5.00
|
R159 (Internet Deliverable)
2D Kitchen Elevations by Gary Gresham
95 symbols in 3 templates provide kitchen elevations that allow quick kitchen
cabinetry & appliance views that coordinate with the existing kitchen templates
found on the DataCAD 7 CD library. $5.00
R160 WITHDRAWN
R161 (Internet Deliverable)
Radial Horizon Hatch by David L. Bravo.
An interesting non-repeating radial hatch pattern useful for horizon
backgrounds or special tile or mural pattern. $5.00
A Best Seller!
R162 (Internet Deliverable)
Delete Empty Layers Macro by Patrick McConnell. Delete all those empty layers you often find in an DWG or DXF import. Tired of importing drawings to find 100's of empty layers making it difficult to navigate and work with the drawing? This macro will eliminate this problem. $5.00
Special update required for DataCAD 10 users. Free for internet delivery
if you purchased it directly from Shu Associates previously (provide approx. purchase date.)
R163 (Internet Deliverable)
Brick/Block/Glass/Panel Hatches by Evan H. Shu. 16 new excellent hatches from AutoCAD freeware, now converted for DataCAD use. Includes: 12" brick, 2x2 brick, Vert. Brick, Flemish, English, Glass Block, Sheet Glass, Screen Block, Wood Panel & more. $5.00
R164 (Internet Deliverable)
ACAD AEC Hatches by Evan H. Shu. 45+/- hatches types from AutoCADAEC hatch file, now converted for DataCAD use. Includes: herringbone, parquet, shingle, shake, clay, houndstooth & more. $5.00
A Best Seller!
R165 (Internet Deliverable)
Siding/Shingle/Shake Hatches by Evan H. Shu. 12 new siding hatches converted from AutoCAD freeware hatches, now converted for DataCAD use. Includes: shake, heavy shake,shingles, siding & more. $5.00
R166 (Internet Deliverable)
Texture Hatches by Evan H. Shu. 8 new textural hatches from AutoCAD freeware hatches, now converted for DataCAD use. Includes: aggregate, background, textured, concrete & more. $5.00
R167 (Internet Deliverable)
Tile/Paver/Floor Hatches by Evan H. Shu. 25+/- tile & flooring hatches from AutoCAD freeware hatches, now converted for DataCAD use. Includes: flagstone, 8 dif. parquets, monticello, random tile, pavers and more. $5.00
A Best Seller!
R168 (Internet Deliverable)
Landscape Hatches by Evan H. Shu. 25+/- landscape hatches from AutoCAD freeware hatches, now converted for DataCAD use. Includes: lattice, garden, stones, water, gravel, plant & more. $5.00
R169 (Internet Deliverable)
Decorative Hatches by Evan H. Shu. 20+/- decorative hatches from AutoCAD freeware hatches, now converted for DataCAD use. Includes: rattan, scallops, weave, boxes, basketweave & more. $5.00
R170 (Internet Deliverable) 
Schematic 3D Trees
by Rick Ferrara.This handy template or drawing file gives
you nice, quick hiding and shading 3D trees that work well with architectural
models without burdening your file with the over abundance of detailing that
you get with typical 3D tree libraries. This template is the perfect companion
to the popular R41 Tree Elevations Template. As a bonus, you also get a 3D Forklift
and 3D Weathervane to add more reality to your renderings. $5.00
R171 (Internet Deliverable)
Elevation by John Lindsay, Pearl City Software. This macro automatically
take your model and automatically generates hidden views of each of the four elevations
and place each on a separate layer for your viewing. Enjoy your cup of coffee while it
does all the work. $5.00
R172 (Internet Deliverable)
3D Jeeps
by Rick Ferrara.
High quality 3D models of a Jeep 4x4, Subaru Brat Pick-up, plus bonus 3D Van. 2D Plan and elevation views also included in DC5
Drawing File. $5.00
R173 (Internet Deliverable)
Cars & People Entourage
by Rick Ferrara.
High quality collection of 53 2D Plan and elevation views of Cars and Trucks as well as 34 elevation and plan views of people. Provided in
DC5 Drawing File. $5.00
R174 (Internet Deliverable)
3D Chairs
by Rick Ferrara.
A collection of 12 Architectural Chairs, including chairs from
Alto, Wright, MacIntosh and others, All Models are 100% DCAD Entites to
insure high quality and low file size. Colors have been set for proper quickshading. DC5 File.
$5.00
R175 (Internet Deliverable)
Layer Off Macro by Patrick
McConnell. Turn off layers by selecting entities.
All normal selection methods can be used. Select entities by Entity, Group, Area,
Fence or Selset and have all layers that the selected entities are on be
turned off. Handy macro for the power layer user.
$5.00
R176 (Internet Deliverable)
Layer Flip Macro by Patrick
McConnell. Flip the layers in a drawing
on/off. Turns all layers that are on off & vice versa. Very useful for global
operations. $5.00
R177 (Internet Deliverable)
Clay Tile Linetypes by Cyrus
Fuller. Three excellent clay roof tile linetypes. Tile linetype can ALSO be used with the "line" pattern hatch to do very nice roof hatching, and left and right ridge cap linetypes to finish the job! $5.00
R178 (Internet Deliverable)
ADA Bathroom by Christopher Glass. Symbol & Drawing of minimum ADA compliant bathroom, based on darwing issued by state of Maine. (No guarantees of
course, since ADA is a moving target — plumbing designed by lawyers!)
$5.00
|
R179 (Internet Deliverable) Cement Hatch Linetype by Christopher Glass. A very useful linetype that will let you stipple hatch concrete walls with one line. $5.00
R180 (Internet Deliverable)
R181 (Internet Deliverable) |  |
R183
Tile Details Floors -DWG by Henry B. Rothberg. Ceramic Tile & Stone details for Concrete, plywood, existing and sound conditions based on using Laticrete materials
for Commercial or Residential applications. 21 files in DWG format.
$5.00
R184
Tile Details Walls -DWG by Henry B. Rothberg. Ceramic Tile & Stone details for Concrete, lath, masonry, and steel framing, based on using Laticrete materials
for Commercial or Residential applications. 8 files in DWG format. (Requires DataCAD 8.5 and up or AutoCAD 14 to load.)
$5.00
R185
Tile Details Waterproofing -DWG by Henry B. Rothberg. Ceramic Tile & Stone details for waterproofing on concrete, plywood, showers and tubs, steam rooms, pipes
and drains based on using Laticrete materials for Commercial or Residential applications. 11 files in DWG format. (Requires DataCAD 8.5 and up or AutoCAD 14 to load.)
$5.00
R186
Tile Details Industrial, Plazas, Decks, & Pools
-DWG by Henry B. Rothberg. Ceramic Tile & Stone details for chemical resistance, plazas, decks, terrace and
balconies, based on using Laticrete materials for Commercial or Residential applications. 8 files in DWG format. (Requires DataCAD 8.5 and up or AutoCAD 14 to load.) $5.00
R187
Tile Details Special & Misc. Applications
-DWG by Henry B. Rothberg. Ceramic Tile & Stone details for expansion joints, countertops, and stairs, based on using Laticrete materials for Commercial or Residential applications. 7 files in DWG format. (Requires DataCAD 8.5 and up or AutoCAD 14 to load.)
$5.00
R188a(WPD) or R188b(DOC) or R188c(PDF)( Internet Deliverable)
Compiled Cheap Tricks Indexes
1990-2000 by Bill Glegg. With our
blessings, the author has compiled all 10 annual indexes for
Cheap Tricks into one master index available in Word Perfect (WPD) or Word Format (DOC) or Adobe Acrobat (PDF) formats. No more hunting around in each index to find that hard to find reference.
$5.00
R189 (Internet Deliverable)
Randrock Hatch by Chris
Bartimus. A pair of nice random rock hatching
patterns (randrock & shadrock) that will work nicely with stone walls, fireplaces,
etc. Comes with both BMP and POF files for use in either DataCAD Windows or
DOS. $5.00
R190 (Internet Deliverable) 
Flex-Duct Linetype by David
Porter. Inspired by need expressed on DBUG
forum for drawing flexible duct runs, this simple single stroke linetype will
fill the bill. Comes with either side drawn or center drawn version.
$5.00
R191 (Internet Deliverable)
Gable Vents Template by Anthony J. Blasio. This
disk contains a template of 14 gable vents of
various standard shapes based on Mid-America's
Catalog. $5.00
R192 (Internet Deliverable)
Circletop Template for Plus by Evan H. Shu. This template of the Andersen Circletops is missing from DataCAD Plus 9.6. The template is provided along with instructions on how to add these symbols to your ZAC Window database. Also available as S116.$5.00
R193 (Internet Deliverable)
Roof Pitches Template by Richard B. Meza. A handy collection of 9 eave roof pitch symbols (from 2/12 to 12/12) with guidelines for 4 different overhangs lengths to choose from. Based on 2 x 6 rafter framing for quick insertion into elevations, it will help ou save tie on drawing your residential elevations, sections, or wall sections.$5.00
R194(Internet Deliverable)
Decorative Leaf Linetypes by Michael Russell. Leaf, Ivy, Fern and Ants linetypes just for fun, landscaping, or decorative borders. $5.00.
R195(Internet Deliverable)
Fanned Paving Hatch by Michael Russell. Stone paving in fanned arch pattern. Provided in DataCAD PAT file. $5.00.
R196(Internet Deliverable)
Stone Paving Hatches by Michael Russell. Floating stone paving pattern in open or filled variations. Provided as DataCAD PAT file.$5.00.
R197(Internet Deliverable)
Haworth 3D Furniture Template by Jonathan Foster. Very
detailed 3D symbols of various panels, tables, etc. from the Haworth Furniture
collection for 3D drawings or renderings. 9 symbols total. $5.00
R198 (Internet Deliverable)
Thinkpad 3D Template by Jonathan Foster. 3D symbols
of Thinkpad laptop computer in various positions for adding realism to
your 3D drawings or renderings. $5.00
R199 (Internet Deliverable)
Rumford Fireplace Drawings by Jerry Headley. Dozens of Rumford Fireplace layouts in plan/elevation/section in DC5 format (converted from manufacturer's DXF supplied files.)$5.00
R200 (Internet Deliverable) 
3D Cars
by Dwight Brennfoerder.
High quality 3D cars collected from freeware modeling sites and organized
in handy DataCAD template file. Great for quickshading or modeling/modeling.
Includes various compacts, sedans, and even a Volvo and a police cars and
ambulance. 10 symbols total. ALSO includes same objects in o2c format
with browser “template viewer” file for handy viewing. $5.00
R201 (Internet Deliverable) 
3D Vans & Light Trucks
by Dwight Brennfoerder.
High quality 3D vehicles collected from freeware modeling sites and
organized in handy DataCAD template file. Great for quickshading or modeling/modeling.
Includes various vans, minivans, pickups, etc. 10 symbols total.
ALSO includes same objects in o2c format with browser “template viewer”
file for handy viewing. $5.00
R202 (Internet Deliverable)
3D Trucks & Trailers
by Dwight Brennfoerder.
High quality 3D vehicles collected from freeware modeling sites and
organized
in handy DataCAD template file. Great for quick shading or modeling/modeling.
Includes various tractor trailors, delivery truck and even a school bus.
7 symbols total. ALSO includes same objects in o2c format with
browser “template viewer” file for handy viewing. $5.00
R203 (Internet Deliverable)
Metal Siding Linetypes
by David Porter.
Two different metal siding linetypes were created for use when working
with pre-engineering metal buildings and their associated metal siding.
The two linetypes were created from the real dimensions taken from actual
metal siding from a U.S. metal building manufacturer. Showing the complicated
flutes and lines of the siding is now as simple as drawing a single line
around the building. $5.00
R204(Internet Deliverable)
Residential Safe Rooms
by FEMA/converted to DataCAD format by Scott Roberts, Creative Architects.
DC5 file with 16 sheets of drawings and details for different methods
of constructing a shelter. $5.00
R205(Internet Deliverable)
NCS Compliant Titleblock Sheets
by Evan H. Shu, FAIA.
The National CAD Standard titleblocks have been collected and converted
into DataCAD DC5 format and provided in 3 handy drawing files, one each
for the ANSI sizes (A thru E), the Architectural sizes (A-F), and the ISO
sizes (A0-A4). These drawing files include the required mapping coordinate
grids and Pen assignments to match NCS standards. $5.00
R206 (Internet Deliverable)
NCS Pen Tables for DataCAD
by Evan H. Shu, FAIA.
This pen table and plotting legned assigns all 255 DataCAD colors to
match to the National CAD Standard (as best as can be accomplished with
DataCAD's 15 pen limit) for plotting guidelines. A NCS pen TBL file and
sample DC5 file are provided. $5.00
R207(Internet Deliverable)
Animal Template
by Mike Backler.
Nine basic animal outlines are provided in handy template form for
useful applications in drawing elevations. Animal symbols included are
cat(2), cow, horse, camel w/rider, dogs(3).. $5.00
R205/S124 (Internet Deliverable)
NCS Compliant Titleblock Sheets
by Evan H. Shu, FAIA.
The National CAD Standard titleblocks have been collected and converted
into DataCAD DC5 format and provided in 3 handy drawing files, one each
for the ANSI sizes (A thru E), the Architectural sizes (A-F), and the ISO
sizes (A0-A4). These drawing files include the required mapping coordinate
grids and Pen assignments to match NCS standards. $5.00 or free
with 5 disk order or $5 CTW dollars.
R206/S125 (Internet Deliverable)
NCS Pen Tables for DataCAD
by Evan H. Shu, FAIA.
This pen table and plotting legend assigns all 255 DataCAD colors to
match to the National CAD Standard (as best as can be accomplished with
DataCAD's 15 pen limit) for plotting guidelines. A NCS pen TBL file and
sample DC5 file are provided. $5.00 or free with 5 disk order
or $5 CTW dollars.
R208/S127 (Internet Deliverable)
NCS 2.0 Abbreviations and Terms Catalog
by Evan H. Shu.
We have converted the some 2,700 abbreviations and terms into a handier
HTML format that can be viewed in your web browser, complete with bookmarks
to the 6 major new categories proposed by NCS 3.0: General, Equipment,
Piping System, Raw Materials, Reference Standards/Organizations, and Manufactured/Constructed/Fabricated
Items. Now you will find it much easier to find the proper NCS abbreviation
or term of your choice. Also provided in Word Chart format. Free w/5
disk order, $5CTW dollars or $5.00 or free with 5 disk order
or $5 CTW dollars.
R209
Medical Charts
by Roger Whitcomb.
If ever in need of a 24 hour chart to track temperature and medcations,
here is one created by the author in DC5 format. Show the doctors, how
it should be done! $5.00
R210/S129 StoneCAD Hatch Patterns (to
see PDF printout of all 20 hatches, click here)
converted by Roger Donaldson.
The freely available StoneCAD hatch patterns for AutoCAD have been
converted to DataCAD format for use in DataCAD 9 and up. Contains 20 complex
stone patterns. $5.00 or free with 5 disk order or $5 CTW dollars.
R211 (Internet Deliverable)
CTW Hatch Collection I (Click Here to View
Hatch patterns in PDF format)
incorporates 5 items: R78 Fieldstone Hatch by Evan H. Shu (Seamless
interlocking rectangular stone paving hatch pattern); R141 Fluted Block
Hatch by John F.Werne, III (fluted cmu blocks); R142 Board & Batten
Hatch by John F. Werne, III. (board and batten siding); R147 Flagstone
Hatches by John Cluver, Voith & Mactavish Architects (interlocking
and linear ashlar pattern); and R161 Radial Horizon Hatch by David L. Bravo
(horizon backgrounds or special tiles). $25 value now only $5.00.
R212 (Internet Deliverable)
Wiggles, Hatch & Wood Linetypes (Click
Here to View Linetypes in PDF format)
A great linetype collection that includes 23 linetype favorites, including
the former individual items R3 Wiggle Linetype, R6 Hatch Linetypes &
R43 Infill Linetype, R57 Wiggle Line Plus , R149 Wood Wall, R179 Cement
Hatch, R180 CSWAVY & CSWood& P26 Special Linetypes, and with one easy installation you get
8 items ($45 value) for the price of one. $5.00
R213 (Internet Deliverable)
Wheelchair Plan Symbols
by David Porter.
3 excellent plan symbols in template format for wheelchairs (with and
without occupant) for detail drawings and to demonstrate ADA compliance.
$5.00
R214 (Internet Deliverable)
Unlock Macro
by Patrick B. McConnell.
Handy for dealing with AutoCAD DWG imports full of locked layers. Just
invoke this Toolbox macro and presto, all the layers will be unlocked.
$5.00
R215 (Internet Deliverable)
DataCAD 10 Shortcut Key Guide Sheets
by Steven Clark AIA.
Extremely handy 2 page reference sheets including all standard keyboard
shortcuts (and based on use of Productivity Pack and Len Nasman's
Quick Keys.) Suitable for printing and laminating for easy referral
at your station. Provided in a DOC file, so you can edit it to conform
to your own keyboard customizations. $5.00
R216 (Internet Deliverable)
Speed Demon GTV Page Finder
by David Porter
Here is a handy new toolbar that allows one to just click on a GTV
page number to get immediately to the GTV page desired. Especially with
v.11 and a second icon toolbar line possible, you can display up to 20
views. It even has advantages over the new v11 GTV scroll which doesn’t
allow one to do is to get to a particular view and update it with new layers
that one has turned on as this new toolbar will. $5.00
R217(Internet Deliverable) |
|
To Go Back to the CTW Main Menu Cheap Tricks Ware Main Menu
To Go to the Order Form
You can E-mail us by clicking here: eshu@world.std.com
Copyright © 2004, Shu Associates Inc.
